SPINDLE : MORE STABILITY AND BETTER LOAD DISTRIBUTION
The Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedaling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.
Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction ).
LOOK axles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation). This is equivalent to a Mark Cavendish sprint at 1700 watts with 100 revolutions/min for 333 hours! This test is far superior to the current industry standard, the EN14781.
Recreational to Competition
9/16 X 20 mm
2 ball bearings, 1 needle bearing cartridge
PEDAL STACK HEIGHT
DISTANCE PEDAL SPINDLE / CRANK ARM
CONTACT SURFACE AREA
3 types of carbon blades: 12, 16 and 20
Kéo Cleats Grey
0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)
110 gr (288 gr per pair with cleats and screws)
A pair of Grey Kéo cleats + screws